Ecobee Says No Equipment Running But Fan is On [Solved]
Have you experienced a problem where the Ecobee says no equipment is running, but the fan continues to run. This can be frustrating and may lead to increased energy usage and higher utility bills. In this blog post, we will explore some possible causes of this issue and provide some troubleshooting steps to help homeowners resolve the problem.
![](https://i0.wp.com/thermostating.com/wp-content/uploads/2023/01/ecobee-thermostat-1-jpg.webp?resize=697%2C386)
Possible Reasons Ecobee Says No Equipment Running But Fan is On
Possible Cause | Potential Fix |
Wiring problems between the thermostat and HVAC equipment | Check wiring for damage or loose connections and re-connect or replace as needed |
Faulty sensors in the HVAC equipment | Replace malfunctioning sensors |
Malfunctioning relays in the HVAC equipment | Replace malfunctioning relays |
Configuration issues with the Ecobee | Review configuration and ensure settings are correct |
There are a few potential causes of the issue where the Ecobee says no equipment is running, but the fan continues to run. Some of the most common causes include:
Also read: Ecobee thermostat not cooling to set temperature
Wiring problems
The wiring between the thermostat and the HVAC equipment may be faulty or damaged, causing a miscommunication between the two. This can result in the fan running even when the equipment is supposed to be off.
Faulty sensors
The sensors in the HVAC equipment may be malfunctioning, causing the system to think that the equipment is off when it is actually running. This can result in the fan running to circulate air even when the heating or cooling function is not activated.
Malfunctioning relays
The relays in the HVAC equipment may be malfunctioning, causing the system to run the fan even when it is supposed to be off. Relays are responsible for turning on and off the various components of the system, so a malfunctioning relay can cause unexpected behavior.
Configuration issues
The Ecobee may be misconfigured or not set up correctly, causing it to display incorrect information about the HVAC equipment. This can cause the system to continue running the fan even when it is not supposed to.
Read also: How To Set Ecobee Thermostat
Troubleshooting Steps
If the Ecobee says no equipment is running, but the fan is on, there are a few troubleshooting steps that you can take to identify the root cause of the problem. Here are some steps to follow:
Check the thermostat display
Check the thermostat display to ensure that it is not set to “Fan Only” mode. If it is, change the setting to “Auto” or “Off” and see if the fan turns off.
Check the wiring
Check the wiring between the thermostat and the HVAC equipment for any damage or loose connections. Re-connect or replace any damaged or loose wiring.
Check the sensors
Check the sensors in the HVAC equipment to ensure that they are functioning properly. If a sensor is malfunctioning, replace it.
Check the relays Check the relays in the HVAC equipment to ensure that they are functioning properly. If a relay is malfunctioning, replace it.
Restart the system
Try turning the system off and on again to see if this resolves the issue. This can sometimes reset the system and resolve any temporary issues.
Review the Ecobee configuration: Review the Ecobee configuration to ensure that it is set up correctly and that the settings are appropriate for your particular system. Check for any discrepancies between the configuration and the actual setup of the system.
Also read: AC not working thermostat says wait
Possible Solutions
Based on the results of the troubleshooting steps outlined above, there are also a few possible solutions to the problem where the Ecobee says no equipment is running, but the fan continues to run. Here are some possible solutions:
Fix wiring problems
If the issue is caused by faulty or damaged wiring, the homeowner should re-connect or replace any damaged or loose wiring. This should resolve the issue and prevent it from happening again in the future.
Replace faulty sensors
If the issue is caused by malfunctioning sensors, the homeowner should replace the affected sensors. This will ensure that the system accurately detects when the equipment is running and will prevent the fan from running when it is not supposed to.
Read: Ecobee not heating (Full troubleshooting guide)
Replace malfunctioning relays
If the issue is caused by malfunctioning relays, the homeowner should replace the affected relays. This will ensure that the system properly turns on and off the various components of the system, including the fan.
Adjust Ecobee configuration
If the issue is caused by a misconfigured Ecobee, the homeowner should review the configuration and ensure that it is set up correctly. This may involve adjusting the settings to better match the homeowner’s particular system and setup.
When to Call for Help
While many issues with the Ecobee saying no equipment is running, but the fan continues to run can be resolved through the troubleshooting steps and possible solutions outlined above, there may be instances where you need to call for professional help. Here are some instances where calling for help may be necessary:
Read also: AC condenser unit running but no air blowing inside
If you are not familiar with HVAC systems or do not have experience with the necessary repairs, it may be best to call a licensed professional to avoid causing further damage or risking personal injury.
Warranty concerns: If the HVAC system is still under warranty, you should consult with the manufacturer to determine if performing any repairs yourself will void the warranty.
Complex repairs: If the repairs required are complex or involve specialized tools or equipment, you may need to call a licensed professional to perform the repairs properly.