Amazon Thermostat Blowing Hot Air On Cool [Fixed]
Amazon Thermostat may be blowing hot air on cool settings due to a malfunctioning thermostat or sensor, a stuck reversing valve, or dirty air filters.Solutions include checking and replacing air filters, resetting the thermostat, or replacing the reversing valve (with caution and experience).
Why is Your Amazon Thermostat Blowing Hot Air When Set to Cool?’
If your Amazon thermostat is blowing hot air when it’s set to cool, it can be frustrating and uncomfortable. There are a few common reasons why this might be happening, including:
- A stuck reversing valve can also be a reason why an Amazon Thermostat is blowing hot air on cool setting. The reversing valve is responsible for switching the flow of refrigerant between heating and cooling modes, and if it gets stuck in the heating mode, hot air will be blown even on the cool setting. In this case, one solution is to try to manually unstick the valve, but this should be done carefully and only if you have experience with HVAC systems
- Incorrect Thermostat Settings: One of the most common reasons why an Amazon thermostat might blow hot air instead of cool air is due to incorrect thermostat settings. This can happen if the thermostat is set to heat instead of cool, or if the fan is set to “on” instead of “auto.” Double-check your thermostat settings to make sure they’re set to cool mode.
- Dirty Air Filter: Another reason why your Amazon thermostat might blow hot air is due to a dirty or clogged air filter. Over time, air filters can become clogged with dirt and debris, which can restrict airflow and cause the system to work harder than it should. This can lead to overheating and blowing hot air instead of cool air.
- Faulty Wiring: If the wiring on your Amazon thermostat is faulty, it can cause the system to malfunction and blow hot air. Wiring problems can occur due to loose or disconnected wires or frayed wires, which can interfere with the thermostat’s ability to accurately read the temperature in your home.
- Low Refrigerant Levels: Another common cause of an Amazon thermostat blowing hot air when it’s set to cool is due to low refrigerant levels. Refrigerant is a substance that is responsible for cooling the air in your home. If your system is low on refrigerant, it can’t cool the air properly, and it may blow hot air instead.
- System Malfunction: In some cases, an Amazon thermostat blowing hot air on cool mode may be due to a malfunction within the system. This can be caused by a variety of issues, including a faulty compressor or a refrigerant leak. In these cases, it’s best to contact a professional HVAC technician to diagnose and repair the problem.
Read also: Honeywell thermostat blowing hot air on cool
How to Fix an Amazon Thermostat Blowing Hot Air When Set to Cool’
Check the thermostat settings: The first thing to do when troubleshooting an Amazon thermostat that’s blowing hot air when it should be cooling is to check the settings. Make sure that your thermostat is set to the “cool” mode and not “heat” or “auto.” It’s also a good idea to double-check that your thermostat’s fan is set to “auto” rather than “on.”
Check the air filter: A dirty or clogged air filter can restrict airflow and cause your thermostat to blow hot air. Over time, dirt and debris can accumulate in the air filter, making it harder for air to pass through. This can cause your thermostat to work harder and longer than it needs to, which can lead to overheating and blowing hot air. Make sure to replace or clean your air filter according to the manufacturer’s instructions.
Check the thermostat wiring: A loose or damaged thermostat wire can cause your Amazon thermostat to malfunction. If the wires aren’t properly connected, the thermostat may not be able to accurately read the temperature in your home, which can cause it to blow hot air when it should be cooling. Check the wiring connections to make sure they’re secure and look for any frayed wires that may need to be replaced.
Check the refrigerant levels: If your Amazon thermostat is blowing hot air, it could be due to low refrigerant levels. Refrigerant is the substance that your air conditioner uses to cool your home, and low levels can cause your system to blow hot air. Checking and adding refrigerant is a more advanced fix that should only be attempted by a trained HVAC professional.
Reset the thermostat: Sometimes, simply resetting the thermostat can fix the problem. Turn off the power to your thermostat for a few minutes, then turn it back on. This can help clear any errors or glitches in the system and give it a fresh start.
Read also: Nest blowing hot air on cool
Expert Tips for Maintaining Your Amazon Thermostat and Avoiding Future Issues.
Maintaining your Amazon thermostat is essential for keeping your home comfortable and avoiding future issues. Here are some expert tips for maintaining your thermostat and preventing potential problems:
Change Your Air Filter Regularly: A dirty air filter can cause your Amazon thermostat to blow hot air instead of cool air, as it restricts airflow and can cause the system to overheat. It’s recommended that you change your air filter every one to three months, depending on how often you use your HVAC system.
Check Your Thermostat Settings: Make sure your Amazon thermostat is set to the correct mode (cooling or heating) and that the fan is set to “auto” rather than “on.” If your thermostat is in heating mode during the summer, it can cause your system to blow hot air instead of cool air.
Keep Your Thermostat Clean: Regularly dusting and cleaning your Amazon thermostat can prevent dirt and debris from building up on the device, which can interfere with its functionality.
Check Your Wiring Connections: Loose or damaged wiring can cause your Amazon thermostat to malfunction and blow hot air instead of cool air. Regularly check your wiring connections and make sure they’re secure and in good condition.
Schedule Regular HVAC Maintenance: Having your HVAC system inspected and serviced by a professional once a year can prevent potential issues and keep your system running efficiently. During the maintenance visit, the technician can check your refrigerant levels, clean your coils, and inspect your system for any signs of wear or damage.
More resources:
https://www.amazon.com/gp/help/customer/display.html?nodeId=GKUTED5RCMWL9W8U